ABB IRB 8700 Series - Inspecting the Oil Level in Axis-4 Secondary Gearbox

3.3.4 Inspecting the oil level in axis-4 secondary gearbox
Location of oil plug
The oil plug through which the oil is inspected is located as shown in the figure.
xx1500002000
Required tools
NoteArticle numberEquipment
Content is defined in section Standard
toolkit on page 833.
-Standard toolkit
Required consumable
NoteArticle numberConsumable
Information about the oil is found
in Technical reference manu-
al - Lubrication in gearboxes.
-Lubrication oil
Required documents
NoteDocument numberDocument
3HAC042927-001Technical reference manual - Lub-
rication in gearboxes
Inspecting the oil level in axis-4 secondary gearbox
NoteAction
Jog axis-2 to -60° position approximately.1
Jog axis-3 to +10° position approximately.2
Continues on next page
Product manual - IRB 8700 113
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.3.4 Inspecting the oil level in axis-4 secondary gearbox