NoteAction
xx1500002014
Remove the protection cap from the nipple
of the oil draining plug and connect the oil
dispenser.
5
Suck out the oil with the oil dispenser.
Note
There will be some oil left in the gear after
draining.
6
WARNING
Used oil is hazardous material and must
be disposed of in a safe way. See section
Decommissioning on page 819 for more in-
formation.
7
xx1500002014
Remove the oil dispenser and refit the
protection cap to the nipple of the oil
draining plug.
8
Continues on next page
Product manual - IRB 8700 149
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.3 Changing oil in axis-2 and axis-3 gearbox
Continued
To Next Page
Loading...
