NoteAction
xx1500002016
Remove the protection cap from the nipple
of the oil draining plug and connect the oil
dispenser.
6
Suck out the oil using the oil dispenser.
Note
There will be some oil left in the gear after
draining.
7
WARNING
Used oil is hazardous material and must
be disposed of in a safe way. See section
Decommissioning on page 819 for more in-
formation.
8
xx1500002016
Remove the oil dispenser and refit the
protection cap to the nipple of the oil
draining plug.
9
Tightening torque: 24 Nm.
xx1500002017
Refit the ventilation plug.10
Continues on next page
Product manual - IRB 8700 155
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.4 Changing oil, axis-4 primary gearbox
Continued
To Next Page
Loading...
