NoteAction
xx1500003097
Unscrew the attachment screws with
washers.
2
CAUTION
Parting/mating motor pinion and hub, may
damage the splines if excessive force is
used.
3
Removal tool M10If required, press the motor out of position
by fitting the removal tool, to the attach-
ment holes of the motor.
4
CAUTION
The motor weighs 14 kg.
5
xx1500003098
Remove the motor by lifting it straight up
from the gear.
Make sure the motor pinion is not dam-
aged.
6
Disconnect the 24 VDC power supply.7
Attaching lifting accessories to the axis-6 unit
NoteAction
CAUTION
The axis-6 unit weighs 165 kg. All lifting
accessories must be sized accordingly.
1
Continues on next page
328 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.3 Replacing the axis-6 unit
Continued
To Next Page
Loading...
