NoteAction
Scotch-brite abrasive cleaning hand pad
xx1500002749
Use a Scotch-brite abrasive cleaning hand
pad and rub the contact surfaces on the
shafts.
2
Isopropanol
xx1500002749
Wipe the contact surfaces on shaft, outer
ring of bearing and sealing ring meticu-
lously clean with Isopropanol.
Note
Do not touch the cleaned cone surface of
the shaft with anything after cleaning.
3
Scotch-brite abrasive cleaning hand pad
xx1500002750
Use a Scotch-brite abrasive cleaning hand
pad and rub the contact surfaces in the
holes for the shafts, outer ring of bearings
and sealing rings.
4
Continues on next page
Product manual - IRB 8700 401
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.6 Replacing the complete lower arm
Continued
To Next Page
Loading...
