NoteAction
xx1600000047
CAUTION
When fitting the motor cover, make sure
that none of the cables inside will be dam-
aged.
7
Attachment screws: M5x20 (5 pcs)
xx1200001080
Refit the motor cover.8
Refitting the lower arm assembly - step 2
The lower arm assembly consists of lower arm and parallel arm together.
NoteAction
Turn on the power and jog the robot to the spe-
cified position:
• Axis-2: No significance (as long as the ro-
bot is secured to the foundation)
• Axis-2: +20
• Axis-3: 0
• Axis-4: 0
• Axis-5: 0
• Axis-6: No significance
1
Refit the remaining screws that secure the lower
arm and parallel arm to the axis-2 and axis-3
gearboxes.
2
Attachment screws: M16x70 12.9
Gleitmo
Secure the attachment screws.3
Tightening torque: 300 Nm
Continues on next page
420 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.6 Replacing the complete lower arm
Continued
To Next Page
Loading...
