Lifting, base plate
NoteAction
CAUTION
The base plate weighs 760 kg. All lifting accessories
used must be sized accordingly.
1
Shown in figure Hole configur-
ation on page 67.
Fit a lifting eye in the center hole of the base plate.2
Fit the roundsling to the lifting eye and lifting accessory.
Use caution and lift the base plate.
CAUTION
Lift and move the base plate very slowly. If the base
plate starts to swing it is a risk for injuries or damage.
3
68 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.3 Lifting the base plate
Continued
To Next Page
Loading...
