Action
This step is valid for RobotWare 6.02 and later.3
Calibration method used at factory for each axis is shown, as well as calibration
method used during last field calibration.
Tap Manual Method (Advanced).
xx1500000944
A screen is displayed, tap Rev. Counters.
en0400000771
4
Continues on next page
Product manual - IRB 8700 803
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
5 Calibration
5.3 Updating revolution counters
Continued
To Next Page
Loading...
