ABB PFEA 113 - Menus for Changing from Standard Roll to Single Side Measurement

Tension Electronics PFEA113, User Manual
Section 6.8.3 Changing to Single Side Measurement If One Load Cell Is Faulty
3BSE029382R0101 Rev C 6-9
6.8.3.1 Menus for Changing from Standard Roll to Single Side Measurement
Use these menus to change to Single Side Measurement.
FastSetUp
WebTension
Presentation-
Menu
SetNominal-
Load
ServiceMenu
ZeroSet
SetWrapGain
> 5 s
AO 1 - AO 6
Miscellaneous
Menu
System-
Definition
ObjectType
DO 1 - DO 4
AI 1 - AI 2
DI
AreYouSure SetObject
ZZ
SetObject
[ZZ]
ObjectType
Setting Object Type for One Roll
Roll 1 SetObject
ZZ
SetObject
ZZ
AreYouSure
[ZZ]
AreYouSure
[ZZ]
Setting Object Types for Two Rolls
Roll 2
ObjectType
SetObject
[ZZ]
SetObject
[ZZ]