ABB PFEA 113 - Miscellaneous Menu; Profibus; Set Factory Default

Tension Electronics PFEA113, User Manual
Section 3.12.11 Miscellaneous Menu
3BSE029382R0101 Rev C 3-35
3.12.11 Miscellaneous Menu
Figure 3-20. Miscellaneous Menus
3.12.11.1 Profibus
•Profibus On/Off
The Profibus can be enabled or disabled.
• Profibus address
If the Profibus is enabled, the Profibus address must be set in the range 000 - 125.
Read more about the Profibus in Section 3.13.
3.12.11.2 Set Factory Default
• Set factory default
The parameters are set as on delivery except Maximum load A, Maximum load B,
Maximum load C and Maximum load D.
Read more in Appendix A.5 Factory Default Settings.
FastSetUp
WebTension
Presentation-
Menu
SetNominal-
Load
ServiceMenu
ZeroSet
SetWrapGain
> 5 s
AO 1 - AO 6
Miscellaneous
Menu
System-
Definition
ObjectType
DO 1 - DO 4
AI 1 - AI 2
DI
To
Miscellaneous-
Menu
Profibus On/Off
[ZZ]
ProfibusAddress
[ZZ]
Profibus On/Off
ZZ
ProfibusAddress
ZZ
SetFactory
Default
AreYouSure ActionDone
(shown for 1 s.)
ServiceMenu
MeasuringRange
Roll 1
MeasuringRange
ZZ
LoadDivision
[ZZ]
MeasuringRange
Roll 2
MeasuringRange
ZZ
LoadDivision
[ZZ]