Tension Electronics PFEA113, User Manual
Appendix A Technical Data for Tension Electronics PFEA113
A-8 3BSE029382R0101 Rev C
Table A-5. Data for Signal Outputs
Data Comments
Voltage output 0 - 10 V Range -5 to +11 V
Max. load 5 mA
Ripple <10 mV
p-p
Wrap gain = 1
Step response time 5 ms
Band width 132 Hz
Current output 4 - 20 mA Range 0 to 21 mA
Max. load 550
Step response time 5 ms
Band width 132 Hz
Additional filtering for
voltage and current
output “FilterSettings”
Step response
time:
15 ms
30 ms
75 ms
250 ms
750 ms
1500 ms
Cut-off
frequency:
35 Hz
15 Hz
5 Hz
1.5 Hz
0.5 Hz
0.25 Hz
Wrap gain adjustment 0.5 - 20
Table A-6. Data for Analog Inputs
Data Comments
Signal range 0 - 10 V
Table A-7. Data for Digital Inputs
Data Comments
Logic levels Passive: -36 V to +5 V
Active: >16 V (max. + 36 V)
For change of state, the pulse
length must be min. 100 ms.
To Next Page
Loading...
