IEC15000329 V2 EN-US
Figure 17: IED insertion in online mode
1. Right-click the Bay and select New and application type of IED.
2. Select the IED type to insert.
It is also possible to drag an IED from the Object Types
window to the Bay level.
3. Select the Online Configuration mode, see Figure 18.
IEC09000711 V2 EN-US
Figure 18: PCM600: Configuration mode selection wizard
4. Select the IED Communication protocol, see Figure 19.
Section 4 1MRK 511 398-UEN C
Setting up a project
50 670 series 2.2 IEC
Engineering manual
To Next Page
Loading...
