IEC09000714 V4 EN-US
Figure 21: PCM600: IED Version detection
The IEC 61850 protocal edition can be changed later in the Plant Structure
view by right-clicking on the IED and selecting Change SCL Version if it is
the only IED in the plant structure.
SCL versions can be changed only if option 'Allow changing SCL version of
an IED configuration' is selected from options in Tools menu and only if one
IED is present in the plant structure.
8. Click Next to open the Housing Selection Page. The IED housing type and
display type are detected and displayed as shown in
Figure 22.
IEC09000742 V3 EN-US
Figure 22: PCM600: IED housing and display type detection
9. The Setup Complete Page dialog shows the summary of the IED Type, IED
Version, IP Address of IED and Order Option, see Figure 23. It is possible to
Cancel the insertion or confirm the configuration and do the insertion with
Finish.
Section 4 1MRK 511 398-UEN C
Setting up a project
52 670 series 2.2 IEC
Engineering manual
To Next Page
Loading...
