Commissioning of the KNX function via ABB DCA SmartTouch 10 (from
ETS5)
Product manual 2CKA001473B5343
113
Fig. 43: "Group addresses" area
The group address of the elements is used for the functional allocation:
■
The sending group contains the group address to which a telegram is to be sent. A
maximum of one sending group address can be used per element.
■
The status groups include one or several group addresses to display the status of a
component. The sending group address is often also a status group.
■
The value includes the value that is to be sent or the value to which the device (home
automation system) is to respond.
To Next Page
Loading...
