KNX control elements and application parameters
"Display" control element
Product manual 2CKA001473B5343
187
10.13.35 Type of display element — Energy — Data point type
Data point type
Options: 13,013
13,010
The parameter is used to specify the data point used.
10.13.36 Type of display element — Energy — Unit
Options: Wh
kWh
The parameter is used to specify the unit with which the energy is displayed in the display
element.
10.13.37 Type of display element — Power factor — Unit
Options: Specified at cos Φ
The parameter is used to specify the unit with which the power factor is displayed in the display
element.
10.13.38 Type of display element — Phase angle — Unit
Options: Fixed at °
The parameter is used to specify the unit with which the phase angle is displayed in the display
element.
To Next Page
Loading...
