KNX control elements and application parameters
"Display" control element
Product manual 2CKA001473B5343
185
10.13.24 Type of display element — Moisture — Unit
Options: Fixed at %
The parameter is used to specify the unit with which the air moisture is displayed in the display
element.
10.13.25 Type of display element — Air pressure — Unit
Options: Fixed at Pa
The parameter is used to specify the unit with which the air pressure is displayed in the display
element.
10.13.26 Type of display element — Measurement of power consumption— Data point type
Data point type
Options: 13,013
13,010
The parameter is used to specify the data point used.
10.13.27 Type of display element — Measurement of power consumption— Unit
Options: Wh
kWh
The parameter is used to specify the unit with which the "Measurement of power consumption"
is shown in the display element.
10.13.28 Type of display element — Voltage— Data point type
Data point type
Options: 14,027
9,027
The parameter is used to specify the data point used.
10.13.29 Type of display element — Voltage — Unit
Options: mV
V
The parameter is used to specify the unit with which the voltage is displayed in the display
element.
10.13.30 Type of display element — Current — Data point type
Data point type
Options: 14,019
To Next Page
Loading...
