Operation
Product manual 2CKA001473B5343
320
12.3 Special functions
12.3.1 Editing
Different changes can be made to control elements via the "Edit" function. The "Edit" function
can only be called up via the main operating page and the operating pages.
Moving / deleting control elements:
Fig. 48: Moving / deleting control element
1. Tap on the pin icon at the bottom left edge of the screen.
2. Then tap on a control element.
3. Change the position via the arrow buttons
4. Delete the control element via the dustbin icon.
Notice
This function is available for control elements that have been stored on the
dashboard as favourites.
Changing the background image of the control element
1. Tap on the corresponding control element.
2. Tap on the three points at the top right in the control element.
3. Changing the screen cutout.
To Next Page
Loading...
