ABB SmartTouch B/stainless

Commissioning of the KNX function via ABB DCA SmartTouch 10 (from
ETS5)
Product manual 2CKA001473B5343
│
70
9.1.4 Integrating the ABB SmartTouch
®
into the ETS
The following steps describe how to integrate the ABB SmartTouch
®
into the ETS.
1. Start the ETS.
2. Import the product data of the ABB SmartTouch
®
into the project database via the import
function of the ETS (File type: *.knxprod).