KNX control elements and application parameters
Control "Split Unit Control"
Product manual 2CKA001473B5343
153
10.9.9 Number of fan speed levels (without AUTO)
Options: 1
2
3
The parameter determines how many fan speed levels (without auto) are available.
10.9.10 Use automatic mode for fans
Options: Disabled
Activated
The parameter is used to specify whether the automatic mode for the fan is activated.
10.9.11 Use mode: Automatic
Options: Disabled
Activated
This parameter is used to specify whether the automatic mode is activated.
10.9.12 Use mode: Heating
Options: Disabled
Activated
The parameter is used to specify whether the heating mode is activated.
To Next Page
Loading...
