KNX control elements and application parameters
Control element "Audio control"
Product manual 2CKA001473B5343
194
- 1 bit: Random playback commands are sent with 1 bit (0 or 1). The following
supplementary parameter is available:
Value for shuffle:
Options: 0
1
The parameter is used to send the the "Value for shuffle" with "0" or "1".
- 1-byte value [0..255]: The value without random playback is sent as a 1-byte unsigned
value. The following supplementary parameter is available:
Value for not shuffle:
Options: 0
1
The parameter is used to send the the "Value for not shuffle" with "0" or "1".
- 1-byte value [0..255]: The value without random playback is sent as a 1-byte unsigned
value. The following supplementary parameter is available:
Value for shuffle:
Options: Setting option from 0 - 255
The parameter is used to send the "Value for shuffle" as absolute value.
Value for not shuffle:
Options: Setting option from 0 - 255
The parameter is used to send the "Value for not shuffle" as absolute value.
- 1 bit: Random playback commands are sent with 1 bit (0 or 1). The following
supplementary parameter is available:
10.14.2 Use repeat control
Options: Deactivated
Activated
– Deactivated: No repetition is enabled. No additional parameters available.
– Activated: The repetition is enabled. The following supplementary parameter is available:
Object type repeat control:
Options: 1 bit
1-byte value [0 - 255]
The parameter is used to specify the size of the communication object for sending
telegrams.
- 1 bit: Repeat commands are sent with 1 bit (0 or 1). The following supplementary
parameter is available:
Value for repeating:
Options: 0
1
To Next Page
Loading...
