KNX control elements and application parameters
"Display" control element
Product manual 2CKA001473B5343
177
10.13.9 Type of display element — Linear measurement display — Measurement display with
colour display
Options: Deactivated
Activated
The parameter is used to specify whether a colour display follows. For this the communication
objects "Switch alarm", "Switch warning", and "Switch information" are enabled.
10.13.10 Type of display element — Linear measurement display — Display value in control
element
Options: Deactivated
Activated
The parameter is used to specify whether the value of the selected element is displayed in the
display element.
– Deactivated: No display. No additional parameters available.
– Activated: The following supplementary parameters are displayed:
Unit:
Options: <Text>
The parameter is used to enter the unit or the unit sign with which the measured value is
displayed in the display element.
The length of the text is limited to 60 characters.
Decimal places:
Options: Setting option from 0 - 2
The parameter is used to specify the number of decimal places of the displayed measured
value.
The number is limited to 2 places.
Thousands separator:
Options: Deactivated
Activated
The parameter is used to specify whether a thousands separator is displayed in the
measured value.
To Next Page
Loading...
