KNX control elements and application parameters
"Display" control element
Product manual 2CKA001473B5343
186
9,021
The parameter is used to specify the data point used.
10.13.31 Type of display element — Current — Unit
Options: mA
A
The parameter is used to specify the unit with which the current is displayed in the display
element.
10.13.32 Type of display element — Frequency — Unit
Options: Fixed at Hz
The parameter is used to specify the unit with which the frequency is displayed in the display
element.
10.13.33 Type of display element — Power— Data point type
Data point type
Options: 14,056
9,024
The parameter is used to specify the data point used.
10.13.34 Type of display element — Power — Unit
Options: W
kW
The parameter is used to specify the unit with which the power is displayed in the display
element.
To Next Page
Loading...
