KNX control elements and application parameters
Control element "Audio control"
Product manual 2CKA001473B5343
191
- 1-byte value [0 - 255]: The value of an audio source is sent as 1-byte value without a
sign. The following supplementary parameter is available:
Source x value:
Options: Setting option from 0 - 255
The parameter is used to send the value per source.
10.14.6 Object type Playback / Pause control
Object type Playback / Pause control:
Options: 1 bit
1-byte value [0 - 255]
The parameter is used to specify the size of the communication object for sending
telegrams.
– 1 bit: Commands of a playback button are sent with 1 bit (0 or 1). The following
supplementary parameter is available:
Value for play:
Options: 0
1
The parameter is used to send the command of the playback button with "0" or "1".
– 1 bit: Commands of a pause button are sent with 1 bit (0 or 1). The following
supplementary parameter is available:
Value for pause:
Options: 0
1
The parameter is used to send the command of the pause button with "0" or "1".
- 1-byte value [0 - 255]: The value of a playback button is sent as 1-byte value without a
sign. The following supplementary parameter is available:
Value for play:
Options: Setting option from 0 - 255
The parameter is used to send the value of the playback button as absolute value.
- 1-byte value [0 - 255]: The value of a pause button is sent as 1-byte value without a
sign. The following supplementary parameter is available:
Value for pause:
Options: Setting option from 0 - 255
The parameter is used to send the value of the pause button as absolute value.
10.14.7 Use forward/reverse control
Options: Disabled
Activated
To Next Page
Loading...
