KNX control elements and application parameters
"Display" control element
Product manual 2CKA001473B5343
188
10.13.39 Type of display element — Gas (volume) — Data point type
Data point type
Options: 12.1201
14,076
12.1200
The parameter is used to specify the data point used.
10.13.40 Type of display element — Gas (volume) — Unit
Options: m
3
The parameter is used to specify the unit with which the energy is displayed in the display
element.
10.13.41 Type of display element — Water (volume) — Data point type
Data point type
Options: 12.1201
14,076
12.1200
The parameter is used to specify the data point used.
10.13.42 Type of display element — Water (volume) — Unit
Options: m
3
The parameter is used to specify the unit with which the energy is displayed in the display
element.
10.13.43 Type of display element — Flow-through volume — Data point type
Data point type
Options: 12,001
13,002
The parameter is used to specify the data point used.
10.13.44 Type of display element — Flow-through volume — Unit
Options: Fixed at m
3
/h
The parameter is used to specify the unit with which the energy is displayed in the display
element.
10.13.45 Enable 1-bit communication object "Disable"
To Next Page
Loading...
