KNX control elements and application parameters
Control element: "Value slider"
Product manual 2CKA001473B5343
169
– 4-byte value [0 - 4294967295]: A value is sent as 4-byte value without a sign, e.g. actuating
value.
– 4-byte value [-2147483648 - 2147483647]: A value is sent as 4-byte value with a sign, e.g.
actuating value or time difference.
– 4-byte floating point: A value is sent as 4-byte floating point value, e.g. a temperature value,
a time duration, a power, a consumption value.
The following supplementary parameters are available for all options:
Notice
Different values can be set, depending on the selected option.
Value change:
Options: Setting option depends on the selected object type.
The parameter is used to specify the steps in which a change in values is made.
Minimum object value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the smallest value that is sent from the control element via
telegrams.
Any value within the limits specified by the object type and its value range can be entered.
To Next Page
Loading...
