KNX control elements and application parameters
Application "Internal RTC"
Product manual 2CKA001473B5343
275
Typical values for summer compensation are:
■
20°C: lower outside temperature value
■
32°C: upper outside temperature value
■
0 K: lower setpoint offset
■
4 K: upper setpoint offset
That means that a flowing setpoint increase of 0 to 4 K occurs if the outside temperature
increases from 20°C to 32°C.
Notice
This parameter is only available if the "Summer compensation" parameter is set
on "Yes".
To Next Page
Loading...
