FILE MENU ACTWinPro
Upload Command
This command uploads information from the online controllers and loads into the
current database.
This command should only be used on sites where there is no existing database.
The database should be created and populated with the controllers on the
system. Connect to the controllers and ensure all are online. Clicking upload will
start ACTWinPro uploading all the information from the controllers into the
database.
There are some limitations on upload as not all information is stored in the
controllers:
1. Door group names will have to be re-entered.
2. Names of users and doors are only uploaded if they are in the controllers.
3. User fields are not uploaded.
4. Time and Attendance logs are not uploaded.
5. View->Options settings are not uploaded.
6. For the ACT1000 only a limited amount is uploaded i.e. user names, pins and
card-numbers and door information.
Page 33 Access Control Technology
To Next Page
Loading...