SYSTEM OPTIONS ACTWinPro
System Options
The Options command, available under View, displays a number of tabbed
pages containing general option settings for the access control system. Each
page may be selected by clicking on the appropriate tab.
Note: Some pages are not available in ACTWinPro Lite. If no database is
opened, then only the limited set of pages is available.
Doors
The Doors Page allows the definition of a number of door groups used to define
various regions within the installation
Fire override doors
This selects a door group that defines the doors that are opened automatically
via an input from the fire alarm system. In practice, this input is brought
separately to each controller that is then responsible for opening any of its doors
that have been defined in this group.
Alarm control doors
This selects a door group that defines doors on the system that interface with an
external intruder alarm system. Certain users may arm or disarm the system in
PIN and Swipe operation.
Antipassback doors
Page 72 Access Control Technology
To Next Page
Loading...