DATABASE MENU ACTWinPro
Overtime value limits the number of hours calculated when running the report for
overtime worked hours.
Timed AntiPassback Reset Period
The antipassback feature is designed to stop users giving their cards to other
users seeking to gain access to an area. It does this by requiring users to exit an
area before re-entry will be granted.
When a user is granted access through a timed antipassback door, then the user
will not be granted access again, until (1) the antipassback time period expires or
(2) the user exits.
The antipassback period can be set from 0 days, 0 hours and 0 minutes, up to 6
days, 23 hours and 59 minutes. The antipassback period has resolution of one
minute.
An antipassback time of 0 days, 0 hours 0 minutes effectively disables Timed
Antipassback.
Timed Antipassback only functions on doors which are configured as timed
antipassback doors.
Access Rights
The access rights list box contains a list of up to eight timezone and door group
combinations that determine the access rights for users in this group. Users are
allowed gain access through doors in each listed door group when the
corresponding timezone is active.
To add a group/timezone combination to the list, first select the desired door
group from the Door Group drop-down list. Then select the desired timezone
from the drop-down list and click on the Add button.
To remove a group/timezone combination from the list, select it, and click on the
Remove button.
Default Card
A card template may be selected for each user group. Choose the card template
from the drop down box. Cards that are printed for users will be printed according
to the template assigned in their user group.
Page 62 Access Control Technology
To Next Page
Loading...