ACT ACTWINPRO - Controllers Security

SYSTEM OPTIONS ACTWinPro
Controllers Security
The Security Page allows the setting of the PIN codes used to locally access the
controllers.
These are the PIN codes used to access the menus on the actual controllers.
Installer: This is the PIN code required to access the Installer menu on the
individual controllers. This Installer menu is used to configure the card format and
interfacing aspects of the controller. This is normally a six-digit code with a
default value of 999999.
Operator: This is the PIN code required to access the Operator menu on the
individual controllers. The Operator menu is used to configure the access rights
of users on the controller. This is normally a six digit code with a default value of
123456
Transmit PINs: Check this box to transmit these codes to all controllers when
downloading the database. Uncheck this box to administer the controller PINs on
an individual basis.
Page 74 Access Control Technology