SYSTEM OPTIONS ACTWinPro
SiteServer Page
This page is not available in the Lite version. To allow ACTWinPro to
communicate with the controllers on the system, DCOM security permissions
must be adjusted. Click on Apply Recommended Settings to configure DCOM.
The PC will need to be rebooted after applying the changes.
Performance
The number of events shown in the Recent event view can be adjusted with the
slider. This should be around 50 events for most users. Increasing the number
may reduce performance slightly.
The number of items shown in the reports may be adjusted. On a site with a lot of
traffic this may need to be adjusted upwards to view all events.
Page 83 Access Control Technology
To Next Page
Loading...