DATABASE MENU ACTWinPro
Tech Fault Bleeps
This option instructs the controller to bleep periodically if a technical fault
condition exists. Technical faults include mains faults, tampers and doors offline.
User Limiting
When the number of users inside the perimeter area is equal to the maximum of
either User Limit A or User Limit B then prevent any more users from entering.
The user limits are configured in View->Options->Doors.
Capabilities
The capabilities list box gives an indication of the hardware capability of this
particular controller. The contents will change according to the value of the type
field. It is important that the correct controller type be selected initially as
otherwise certain controller features may not be available.
Page 47 Access Control Technology
To Next Page
Loading...