INSTALLATION ACTWinPro
INSTALLATION
System Requirements
The system requirements for ACTWinPro are dependant on your access control
system configuration and the amount of traffic generated by doors and
controllers. Listed are several different ‘typical’ configurations and the hardware
and software requirements for those configurations.
Common PC requirements are:
1. Colour SVGA monitor with at least 800x600 screen resolution
2. Mouse and keyboard
3. CDROM drive (required during installation only)
4. Free RS232 serial port or USB-RS232 adapter (for serial connections
only)
5. Ethernet or FastEthernet LAN connection with TCP/IP protocol
(100MBps preferable) (for LAN connections only)
6. Hardware modem (for modem connections only). ACTWinPro does not
support software modems (e.g. PCI or USB WinModems)
Configuration 1
ACTWinProLite or ACTWinPro in a single-client mode
Number of client PCs : 1
Number of doors: Up to 30
Processor (CPU): Pentium II 400 MHz
Memory (RAM): 64 Mbytes
Free hard disk space: 20 Mbytes
Operating system: Windows 98
Windows Me,
Windows NT 4.0 with Service Pack 6a and Internet
Explorer 5.0 or higher
Windows 2000 with Service Pack 4 or higher
Windows XP Professional or Home
Windows Server 2003
Page 5 Access Control Technology
To Next Page
Loading...