ADCMT 7351A User Manual

7351 Series Digital Multimeter Operation Manual
6.7.4 SCPI Command Reference
6-37
Calculation PASS condi-
tion range
setting
:CALCulate:LIMit:PASS:LOWer {ON,1|OFF,0} ON, 1: Calculation result LOW is
specified as the PASS condition.
OFF, 0: Calculation result LOW is
not specified as the PASS condition.
:CALCulate:LIMit:PASS:LOWer? Reply: 1 or 0
:CALCulate:LIMit:PASS:MED {ON,1|OFF,0} ON, 1: Calculation result GO is
specified as the PASS condition.
OFF, 0: Calculation result GO is not
specified as the PASS condition.
:CALCulate:LIMit:PASS:MED?
Reply: 1 or 0
:CALCulate:LIMit:PASS:UPPer {ON,1|OFF,0} ON, 1: Calculation result HI is
specified as the PASS condition.
OFF, 0: Calculation result HI is not
specified as the PASS condition.
:CALCulate:LIMit:PASS:UPPer? Reply: 1 or 0
Statistical cal-
culation
:CALCulate:STATistics <int>,<int> Calculation range specifying and
performing
<int>: 0 to 19999
:CALCulate:STATistics:COUNt? Number of samples reading
Reply: d.dddddEdd
:CALCulate:STATistics:MAXimum? Maximum value reading
Reply: d.dddddEdd
:CALCulate:STATistics:MINimum? Minimum value reading
Reply: d.dddddEdd
:CALCulate:STATistics:AVERage? Average value reading
Reply: d.dddddEdd
:CALCulate:STATistics:DEViation? Standard deviation value reading
Reply: d.dddddEdd
:CALCulate:STATistics:MAXMin? MAX-MIN value reading
Reply: d.dddddEdd
Item SCPI command
Description
Initial
value

ADCMT 7351A Specifications

General

Brand	ADCMT
Model	7351A
Category	Multimeter
Language	English