ADCMT 7351A User Manual

7351 Series Digital Multimeter Operation Manual
6.7.4 SCPI Command Reference
6-38
4. System relevant command
Item SCPI command
Description
Initial
value
System Buzzer :CALCulate:LIMit:BEEPer
{OFF|FAIL|PASS}
OFF: OFF
FAIL: The buzzer sounds when the comparator calcu-
lation result is FAIL.
PASS: The buzzer sounds when the comparator calcu-
lation result is PASS.
:CALCulate:LIMit:BEEPer? Reply: OFF, FAIL, or PASS
:SYSTem:BEEPer:STATe
{ON,1|OFF,0}
ON, 1: Buzzer ON
OFF, 0: Buzzer OFF
:SYSTem:BEEPer:STATe? Reply: 1 or 0
Measurement
data display
:DISPlay {ON,1|OFF,0} ON, 1: ON
OFF, 0: OFF
:DISPlay? Reply: 1 or 0
Power supply
frequency
[:SENSe]:LFRQency {50|60} 50: 50 Hz
60: 60 Hz
[:SENSe]:LFRQency? Reply: 50 or 60
Initialization *RST Parameter initialization
Changing the
response to
*IDN?
*1
:OIDentity {ON,1|OFF,0} OFF,0: The new model name is the response to *IDN?.
ON,1: The old model name is the response to *IDN?.
:OIDentity? Response: 1 or 0
Instrument
information
*IDN? New model name response:
ADC Corp.,xxxxx,nnnnnnnnn,mmm
xxxxx: 7351A or 7351E (Product model name)
nnnnnnnnn: Serial No.
mmm: Revision No.
The new model name response is applied to software revi-
sion C00 or later.
Old model name response
ADC Corp.,xxxxxxxxx,nnnnnnnnn,mmm
xxxxxxxxx: ADCE7351A or ADCE7351E
(Product model name)
nnnnnnnnn: Serial No.
mmm: Revision No.
Block delim-
iter
:SYSTem:GPIB:DELimiter
:BLOCk {CRLF|LF|EOI}
CRLF: CRLF+EOI
LF: LF
EOI: EOI
:SYSTem:GPIB:DELimiter
:BLOCk?
Reply: CRLF, LF, or EOI
*1: This command is applied to software revision C00 or later.

ADCMT 7351A Specifications

General

Brand	ADCMT
Model	7351A
Category	Multimeter
Language	English