Adtech ADT-HC4500 - Page 82

ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 81 -
󰥅󱺯Prompt
󰮤󰟿󰓈󰫥󳕍󰞅󲉰󲑔󴑍󳄙Reset current parameters to default?
󱷣󳄙OK 󱋽 Cancel
󳕉Return /󳕍 Reset / 󰃍Save / 󳕉 Return
Fig. 6.2.2 Can’t reset the parameters
󰥅󱺯Prompt
󰫥󳕍 󰞅󳅬󰬢󱪪󳝂Reset parameters successfully. Please restart.
󳕉Return /󳕍 Reset /󰃍 Save / 󳕉 Return
Fig. 6.2.3 Reset parameters successfully