ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 34 -
Chapter III: Detailed System Operation and Instructions
1. Auto
In the main menu interface, press [F1] (Auto) to enter automatic processing interface, as shown below:
Auto / Speed: / Program name
Ethyne control / Torch up
Preheating control / Torch down
Cutting Control / Height control
Current coordinates
Slot compensation
Preheating delay
Prompt:
Working state: Stopped / Flame
Return / Demonstrate / Manual / Back / Process / Return reference /
Break point / Return
Fig. 3.1 p Flame mode
To Next Page
Loading...