ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 67 -
7) Perforating up/down distance: the distance that torch rises from cutting height to safe height
while perforating (the distance that torch rises from safe height to cutting height), preventing
high temperature solution entering the nozzle.
Note: If not in flame height adjustment, Z axis is synchronous to Y axis. Y, Z can be used for bilateral
drive.
After entering the parameters, press [F6] to save.
4.2 Speed
In Fig. 4 system parameter setting interface, press [F2] to show the interface below, in which you can set the
speed, manual speed, acceleration and deceleration.
Speed Setting Interface
Start speed
Acceleration
Manual speed
Processing speed
Return / System / Speed / Adjust / Control / Precision / Store /
Return
Fig. 4.2 Speed Parameter Setting
To Next Page
Loading...