ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 89 -
Current date: January 13, 2006; Current time: 11:00:00
0 – System setting 0----
1 – BIOS setting 1----BIOS
2 – USB disk setting 2---U
3 – System self test 3---
4 – Start mode 4---
5 – LCD selection 5---
6 – Language 6---
ESC Press number keys to perform operations, press [ESC] to return
6.6.1 BIOS Password Interface
Press [1] to enter BIOS setting interface:
Current date: January 13, 2006; Current time: 11:00:00
Please select the section to update:
0---BIOS 0 – BIOS section
1--- 1 – Program section
2-----16 2 – 16-dot matrix section
3---24 3 – 24-dot matrix section
ESC Press number keys to perform operations, press [ESC] to return
6.6.2 BIOS Setting Interface
Press [1] to select “1. Program section” and press [OK]; the system asks “Confirm to write-in? [y/n]”. Press [y]
To Next Page
Loading...