ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 92 -
Current date: January 13, 2006; Current time: 11:00:00
0----USB 0 – USB communication
1---- U 1 – Format USB disk
2---U 2 – Copy data in USB disk
3---- YAFFS2 3 – Format YAFFS2 section
(ESC) Press number keys to perform operations, press [ESC] to return
6.6.5 BIOS USB Disk Interface
Press [0] to select USB communication, the prompt will prompt “USB transmitting……”
Please find the control system in the connected PC. The control system is indicated by a disk symbol in PC as
USB disk.
Please copy the decompressed folders “ADT”, “PRG” and “HELP” (to copy English, please rename help to help),
and then copy them to the control system, and press [Cancel] to exit the communication connection.
To Next Page
Loading...