９３
10.26 DO1 (RN0-RN1) source
0: RUN VFD Run Signal
1: FA1 Frequency Arrival 1 ----- Initial value
2: FA2 Frequency Arrival 2
3: OL Overload Warning Signal
4: OD Output Deviation Excess for PID control
5: AL Fault Signal
Set 0: RUN VFD Run Signal
0.5Hz
ON
Run command
ON
Running signal
t
F(Hz)
Set 1: FA1 Frequency Arrival 1
ON
FA1 signal
1.2Hz
1.1Hz
1.2Hz
ON
02.01 (Final frequency reference monitor)
F(Hz)
t
1.2Hz
Set 2: FA2 Frequency Arrival 2
ON
FA2 signal
10.37 (FA2 reference at deceleration)
10.36 (FA2 reference at acceleration)
F(Hz)
t
To Next Page
Loading...