Advantech ICR-1601 - Dynamic Routing Setting; RIP Configuration

ICR-1601
103
Dynamic Routing Setting
Go to Basic Network > Routing > Dynamic Routing Tab.
The dynamic routing setting allows user to customize RIP, and OSPF protocols through the router
based on their office setting.
In the "Dynamic Routing" page, there are several configuration windows for dynamic routing feature.
They are the "RIP Configuration" window, "OSPF Configuration" window, "OSPF Area List", and "OSPF Area
Configuration" window. RIP, and OSPF protocols can be configured individually.
The "RIP Configuration" window lets you choose which version of RIP protocol to be activated or
disable it. The "OSPF Configuration" window can let you activate the OSPF dynamic routing protocol and
specify its backbone subnet. Moreover, the "OSPF Area List" window lists all defined areas in the OSPF
network.
RIP Configuration
The RIP configuration setting allows user to customize RIP protocol through the router based on their
office setting.
RIP Configuration
Item
Value setting
Description
RIP Enable
Disable is set by default
Select Disable will disable RIP protocol.
Select RIP v1 will enable RIPv1 protocol.
Select RIP v2 will enable RIPv2 protocol.