Advantech ICR-1601 - Configuration; Enable Event Management

ICR-1601
233
6.2.1 Configuration
Go to Service > Event Handling > Configuration Tab.
Event handling is the service that allows administrator to setup the pre-defined events, handlers, or
response behavior with individual profiles.
Enable Event Management
Configuration
Item
Value setting
Description
Event
Management
The box is unchecked by
default
Check the Enable box to activate the Event Management function.
Enable SMS Management
To use the SMS management function, you have to configure some important settings first.
SMS Configuration
Item
Value setting
Description
Message Prefix
The box is unchecked
by default
Click the Enable box to enable the SMS prefix for validating the received SMS.
Once the function is enabled, you have to enter the prefix behind the
checkbox.
The received managing events SMS must have the designated prefix as an
initial identifier, then corresponding handlers will become effective for further
processing.
Physical
Interface
The box is 3G/4G-1 by
default.
Choose a cellular interface (3G/4G-1 or 3G/4G-2) to configure the SMS
management setting.
Note: 3G/4G-2 is only available for the product with dual cellular module.
SIM Status
N/A
Show the connected cellular service (identified with SIM_A or SIM_B).
Delete Managed
SMS after
Processing
The box is unchecked
by default
Check the Enable box to delete the received managing event SMS after it has
been processed.