Advantech ICR-1601 - Create; Edit Special AP Rule

ICR-1601
94
Create / Edit Special AP Rule
The gateway allows you to custom your Special AP rules. It supports up to a maximum of 8 rule-based
Special AP sets.
When Add button is applied, Special AP Rule Configuration screen will appear.
IP Translation Configuration
Item
Value setting
Description
WAN Interface
1. A Must filled setting
2.All is checked by
default.
Check the interface box(es) to apply the Special AP rule.
By default, All is checked, and the Special AP rule will be applied to all
WAN interfaces.
Trigger Port
1. A Must filled setting
2.User-defined is
selected by default.
Enter the expected trigger port (or port range) if User-defined is selected
in the dropdown list.
If you select other popular application from the dropdown list, the
corresponding trigger port(s) and incoming ports will be defined
automatically.
Value Range: 1 ~ 65535.
Incoming Ports
1. A Must filled setting
Enter the expected Incoming ports if User-defined is selected in the
Trigger Port dropdown list.
If you select other popular application from the dropdown list, the
corresponding incoming ports will be defined automatically.
Value Range: 1 ~ 65535; It can be a single port, multiple ports separated
by “,”, .or port range.
Time Schedule
1. An Must filled setting
2.(0) Always is selected
by default.
Apply Time Schedule to this rule, otherwise leave it as Always.
If the dropdown list is empty ensure Time Schedule is pre-configured.
Refer to Object Definition > Scheduling > Configuration tab.
Rule
The box is unchecked by
default
Check the Enable box to activate the special AP rule.
Save
N/A
Click the Save button to save the settings.
Undo
N/A
Click the Undo button to cancel the settings