Advantech ICR-1601 - WAN Interface Ipv6 Network Status

ICR-1601
244
Conn. Status
N/A
It displays the connection status of the device to your ISP.
Status are Connected or disconnected.
Action
N/A
This area provides functional buttons.
Renew button allows user to force the device to request an IP address from
the DHCP server. Note: Renew button is available when DHCP WAN Type is
used and WAN connection is disconnected.
Release button allows user to force the device to clear its IP address setting
to disconnect from DHCP server. Note: Release button is available when
DHCP WAN Type is used and WAN connection is connected.
Connect button allows user to manually connect the device to the Internet.
Note: Connect button is available when Connection Control in WAN Type
setting is set to Connect Manually (Refer to Edit button in Basic Network >
WAN & Uplink > Internet Setup) and WAN connection status is
disconnected.
Disconnect button allows user to manually disconnect the device from the
Internet. Note: Connect button is available when Connection Control in
WAN Type setting is set to Connect Manually (Refer to Edit button in Basic
Network > WAN & Uplink > Internet Setup) and WAN connection status is
connected.
WAN interface IPv6 Network Status
WAN interface IPv6 Network Status screen shows status information for IPv6 network.
WAN interface IPv6 Network Status
Item
Value setting
Description
ID
N/A
It displays corresponding WAN interface WAN IDs.
Interface
N/A
It displays the type of WAN physical interface.
Depending on the model purchased, it can be Ethernet, 3G/4G, etc...
WAN Type
N/A
It displays the method which public IP address is obtained from your ISP.
WAN type setting can be changed from Basic Network > IPv6 >
Configuration.
Link-local IP
Address
N/A
It displays the LAN IPv6 Link-Local address.
Global IP Address
N/A
It displays the IPv6 global IP address assigned by your ISP for your Internet
connection.