ICR-1601
49
VALN Group
Internet
Access
Definition
All boxes are checked by
default.
By default, all boxes are checked means all VLAN ID members are allow to
access WAN interface.
If uncheck a certain VLAN ID box, it means the VLAN ID member can’t access
Internet anymore.
Note: VLAN ID 1 is available always; it is the default VLAN ID of LAN rule. The
other VLAN IDs are available only when they are enabled.
The box is unchecked by
default.
Click the expected VLAN IDs box to enable the Inter VLAN access function.
By default, members in different VLAN IDs can’t access each other. The
gateway supports up to 4 rules for Inter VLAN Group Routing.
For example, if ID_1 and ID_2 are checked, it means members in VLAN ID_1
can access members of VLAN ID_2, and vice versa.
Click the Save button to save the configuration
Tag-based VLAN – Create/Edit VLAN Rules
The Tag-based VLAN allows you to customize each LAN port according to VLAN ID. There is a default
rule shows the configuration of all LAN ports and all VAPs. Also, if your device has a DMZ port, you will see
DMZ configuration, too. The router supports up to a maximum of 128 tag-based VLAN rule sets.
When Add button is applied, Tag-based VLAN Configuration screen will appear.
To Next Page
Loading...
