Advantech ICR-1601 - Ipsec Proposal Definition Window; Manual Key Management

ICR-1601
136
IPSec Proposal Definition Window
Item
Value setting
Description
IPSec Proposal
Definition
A Must fill setting
Specify the Encryption method. It can be None / DES / 3DES / AES-auto / AES-
128 / AES-192 / AES-256.
Note: None is available only when Encapsulation Protocol is set as AH; it is
not available for ESP Encapsulation.
Specify the Authentication method. It can be None / MD5 / SHA1 / SHA2-256.
Note: None and SHA2-256 are available only when Encapsulation Protocol is
set as ESP; they are not available for AH Encapsulation.
Specify the PFS Group. It can be None / Group1 / Group2 / Group5 / Group14
/ Group15 / Group16 / Group17 / Group18.
Click Enable to enable this setting
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings
Back
N/A
Click Back to return to the previous page.
Manual Key Management
When the Manually option is selected for Key Management as described in Authentication
Configuration Window, a series of configuration windows for Manual IPSec Tunnel configuration will
appear. The configuration windows are the Local & Remote Configuration, the Authentication, and the
Manual Proposal.