ICR-1601
20
Connect-on-demand: This gateway won’t
start to establish Internet connection until
local data is going to be sent to WAN side.
After normal data transferring between LAN
and WAN sides, this gateway will disconnect
WAN connection if idle time reaches value of
Maximum Idle Time.
Manually: This gateway won’t start to
establish WAN connection until you press
“Connect” button on web UI. After normal
data transferring between LAN and WAN
sides, this gateway will disconnect WAN
connection if idle time reaches value of
Maximum Idle Time.
Please be noted, if the WAN interface serves as the primary one for another WAN interface in Failover
role, the Connection Control parameter will not be available to you to configure as the system must set it
to “Auto-reconnect (Always on)”.
To Next Page
Loading...
