ICR-1601
75
Specify the intended operation band for the WiFi module.
Basically, this setting is fixed and cannot be changed once the module is
integrated into the router product. However, there are some module with
selectable band for user to choose according to his network environment.
Under such situation, you can specify which operation band is suitable for the
application.
1. A Must filled
setting.
2. By Signal Strength
is selected by
default.
Specify the network selection methodology for connection to an available
wireless uplink network. It can be By Signal Strength or By User-defined
priority.
When By Signal Strength is selected, the router will try to connect to the
available uplink network whose wireless signal strength is the strongest.
When By User-defined is selected, the router will try to connect to the
available uplink network whose priority is the highest (1 is the highest
priority, and 16 is the lowest priority).
Note: to apply the defined Uplink profile(s) for the router to find a best fit profile for connecting to a certain
uplink network, user has to Enable the Profile auto-connect function (Refer to Basic Network > WiFi >
(Module 1/ Module 2) WiFi Configuration tab.
Create/Edit Uplink Profile
The Profile List shows the settings for the created uplink profiles. The information includes Profile
Name, SSID, Channel, Authentication, Encryption, MAC Address, Signal Strength, Priority, and Enable.
When Add button is applied, Profile Configuration screen will appear.
To Next Page
Loading...
