ICR-1601
81
PPPoEv6
PPPoEv6 in IPv6 does the same function as PPPoE in IPv4. The PPPoEv6 server provides configuration
parameters based on PPPoEv6 client request. When PPPoEv6 server gets client request and successfully
authenticates it, the server sends IP address, DNS server addresses and other required parameters to
automatically configure the client.
The diagram above depicts the IPv6 addressing through PPPoE, PPPoEv6 server (DSLAM) on the ISP side
provides IPv6 configuration upon receiving PPPoEv6 client request. When PPPoEv6 server gets client
request and successfully authenticates it, the server sends IP address, DNS server addresses and other
required parameters to automatically configure the client.
To Next Page
Loading...
